LUMATREE BY INDLEDS / SOLID WOOD PENDANT LIGHT

Solid wood.
Comfortable light.

A minimal solid-wood pendant for dining and shared tables. Comfortable downward light, with an optional upward layer to keep the surrounding room present.

The Lumatree difference

Quiet formA slender 20 × 35 mm profile sits lightly above the table.
Natural materialSolid oak, walnut or black ash keeps the grain visible.
Precise lightRecessed optics deliver controlled downlight, with optional indirect light above.
Lumatree Pendant with two suspension wires on a white backgroundSolid wood · direct / indirect light
Actual 1200 mm Lumatree Pendant photographed above a 1900 mm dining table; illustrative furniture pairing

CALM GATHERING

Light that holds the room together.

Downward light establishes the table as a functional centre. Indirect light keeps the upper room present, reducing the hard separation between a bright table and a disappearing interior.

Photographed: 1200 mm pendant above a 1900 mm table. The furniture shown was available for the shoot; this pairing is illustrative, not a recommended size match.

Lumatree Pendant solid wood grain, brass marker and recessed underside optics

01 / MATERIAL & LIGHT

Solid wood.
Recessed light.

A slender 20 × 35 mm solid-wood section brings natural grain into the room. Recessed optics help limit direct views of the light source from surrounding seats.

01Downward light supports dining, working and everyday conversation.
02Choose downward-only light or an up-and-down version that also lights the ceiling.
03Optional gesture control lets you switch and dim without touching the timber.

02 / WOOD FINISHES

One form.
Three wood expressions.

The finish can relate the luminaire to pale Scandinavian interiors, richer walnut furniture or darker architectural details without changing the product's visual logic.

OakWalnutBlack Ash
Oak, walnut and black ash finish comparison

03 / SCALE & SUSPENSION

A slender body.
Two ways to adjust height.

Three body lengths: 860, 1200 and 1500 mm. Both suspension versions use a 560 mm canopy; the canopy depth and adjustment method differ.

Cable-adjustable version

560 mm42 mm high · 35 mm wide

Canopy: 560 × 35 × 42 mm
Suspension drop: 500–1500 mm

Adjust the cable through the canopy cable grippers. Suited to occasional height changes.

Stepless height-adjustable version

560 mm77.2 mm high · 40 mm wide

Canopy: 560 × 40 × 77.2 mm
Suspension drop: up to 2000 mm

Pull down or push up, then release to hold the height. Suited to frequent adjustment.

Canopy diagrams show side profiles for comparison, not complete installation drawings. Dimensions are length × width × height; suspension-drop values are not heights above the table.

04 / TECHNICAL OVERVIEW

Product details,
at a glance.

Light colour and control choices vary by version. Available configurations can be confirmed for each project.

Lengths & table guide860 / 1200 / 1500 mm

Recommended table spans: 1200–1500 / 1600–2000 / 2000–2400 mm.

Direct output1,440 / 2,160 / 2,640 lm

For the 860 / 1200 / 1500 mm versions respectively.

Indirect output & power2,496 / 3,750 / 3,750 lm

28.2 / 43.3 / 51.7 W; values shown for direct + indirect versions.

Light qualityCRI 92 · UGR 9

64° down / 160° up; fixed 2700K or 3000K, Dim-to-Warm 2200–3000K, Tunable White 2700–6500K.

ControlOn/Off · TRIAC · DALI

Casambi and Matter options; gesture control can switch, dim and separately control direct/indirect light.

Height adjustment500–1500 / up to 2000 mm

Cable-adjustable or stepless height-adjustable suspension; see dimensions above.

MaterialOak / Walnut / Black Ash

Solid wood; FSC-certified wood is available on request.

Electrical & compliance220–240 V · IP20 · CE

50/60 Hz; indoor use; 5-year warranty.

Output figures are for direct + indirect versions. Control and colour-temperature availability varies by configuration; IES, LDT, CAD and 3D files are available for project specification.

Project support

Commercial essentials, kept simple.

Professional information →
01 / Warranty5 yearsComplete luminaire warranty, including the LED light source and driver.
02 / OrderingNo MOQNo minimum order quantity for project evaluation or supply.
03 / EvaluationSamples availableProduct and finish samples can be discussed for active projects.
04 / ResourcesFiles on requestIES, LDT, CAD, 3D and product-specific compliance documentation.

LUMATREE SYSTEM

See how six luminaires work as one family.